Freezing platform + 12-hole lipstick demolding machine-- Sea freight by container shipping for shipment
Freezing platform
After the lipstick is filled into the mold, the material is still hot and flowing. It must be shaped in a low-temperature environment before entering the demolding process. The freezing platform is designed for this purpose: The stainless steel surface directly contacts the bottom of the mold, and it is cooled by an internal compressor to stabilize the surface temperature at a set value. The lipstick material inside the mold gradually solidifies from the outside to the inside.
The platform is made as a single flat plate, allowing multiple mold strips to be laid out at once. It is easy to take and place without having to stack them one by one. The temperature is set and displayed on the digital temperature controller on the panel. The operator can see the current temperature on the screen without having to judge by hand.
Why make a separate platform instead of directly placing it in a cold storage? Because lipstick shaping requires "uniformity, stability, and repeatability". Cold storage has large temperature fluctuations and frequent door openings, resulting in different hardnesses from one batch to another; the platform has a constant temperature, and for the same formula, the same mold, and the same time, the consistency of the output can be guaranteed.
The body is all stainless steel, with a compressor cooling vent on the front, and four wheels with brakes at the bottom. It can be pushed to the filling machine in the workshop and used.
12 Hole lipstick demoulding machine
After the lipstick is shaped in the mold, it needs to be completely removed from the mold - this step is the most prone to problems: The lipstick is soft and the surface is afraid of being touched, and a little force will leave a mark or break off .
This 12-hole demolding machine uses pneumatic drive, using air pressure to simultaneously push out the entire row of lipstick. The force is uniform and the stroke is consistent, and there will be no situation of "it came out on the left, but it's still stuck on the right". The core is the bottom-blowing air design: Compressed air is blown into the bottom of the mold, forming a very thin air film between the lipstick and the aluminum mold, loosening the contact surface first, and then completing the demolding.
This design solves two problems: One is to protect the lipstick material, which does not rub against the mold wall during the push-out process, leaving no scratches or broken ends on the surface; the other is to prevent mold blockage, with no lipstick residue in the mold hole after each demolding, ensuring that the next filling will not be insufficient due to leftover material.
The control is equipped with a touch screen human-machine interface. The demolding parameters are set and saved on the screen, and different formulas are saved with different formula numbers. When changing products, the corresponding parameters can be called out. It can be placed next to the filling machine or the freezing platform to form a production line. The molds are customized according to the customer's lipstick diameter and length - 12 holes is just the number of holes on one mold, and the hole diameter, hole depth, and mold strip length are all made according to the customer's sample.
Packed goods will be repeatedly lifted, assembled, and shifted at the dock and warehouse. The packaging must be able to withstand these movements.
01 Cleaning
Remove the residual materials from the platform, mold, and material path, wipe dry with a cloth, and dry the dust or water marks on the machine's surface.
02 Special protection for key parts
Cover the touch screen with a protective film and add a layer of pearl cotton; the air pressure regulating valve, pressure gauge, etc. are all wrapped separately with bubble film; the desktop of the freezing platform is covered with pearl cotton to prevent damage when fixed.
03 Whole machine lining with bubble film
Wrap the entire machine with one to two layers of bubble film. The bubble film is the buffer layer, and then wrap three to four layers of stretchable winding film from top to bottom. The winding film not only prevents scratches but is also important for moisture prevention - the humidity is high at sea.
04 Lifting tray, locking wheels, reinforcing with packing tape
The equipment is placed on a plywood tray, and two wooden blocks are placed at the bottom to leave a height for forklifts to enter and exit; the machine with wheels is fixed with wooden blocks at the front and back of the wheels, and then the body and the tray are connected with packing tape to avoid the entire machine sliding on the tray during transportation. The black packing tape has two longitudinal and one lateral layer; when tightened, push the machine with your hand, and there should be no obvious shaking.
05 Box sealing and loading into containers
The sides and top of the wooden box are covered with plywood to prevent any movement of the equipment; after the lid is nailed together, "YETO" and "MADE IN CHINA" are sprayed on the front. Once the information is confirmed with the freight forwarder, arrange for a vehicle to deliver the goods.