20L Hydraulic Lifting Vacuum Emulsifier – Tested & Packed for Shipment to Russia
1. Introduction to the machine
The 20L hydraulic lifting vacuum emulsifier is a small-scale production equipment specially designed for viscous products such as creams, toothpaste, gel, and ointments.
It integrates four functions in one stainless steel pot: slow wall-scraping stirring to move the material along the pot wall to prevent sticking and burning; a bottom high-speed homogenizer head generating strong shearing to break down the particles and form a fine and stable emulsion; an external jacket for heating or cooling the material according to the process; a vacuum system to extract air and make the finished product free of bubbles, shiny, and stable.
The entire emulsifier head (pot cover, stirring) is hydraulically lifted. After the head rises, it is much easier to clean the inside of the pot, inspect the homogenizer head and discharge valve, or replace the pot body, which is much more convenient than the old fixed experimental machines that require more effort to clean while bending over. It is very suitable for research and small-scale production (5–5000 liters can be customized according to production volume).

2. Tested before packing
Before applying the film, a test run with water should be conducted to check the lifting, vacuum, heating, homogenization and discharge valves. Once it is confirmed that there is no leakage and the pressure and temperature are normal, the packaging can begin.
3.Packing details
First layer: Shockproof: The control panel, pot body, pressure gauge and valve are all wrapped with thick white foam to prevent hard objects from colliding with each other.

Second layer: Moisture-proof and dust-proof: Multiple transparent stretch films are wound around the entire machine to tightly cover it, preventing moisture and dust.
Third layer: Mechanical fixation: Two black tight straps cross the entire machine and are fixed to the bottom wooden case, ensuring no displacement during transportation.

Then, it is placed inside a plywood box: The entire machine with a tray is put into a non-sterilized plywood box. Wooden blocks are placed inside the box to support the pot body and machine frame to prevent the machine from bouncing inside the box.
Wooden box identification: The box is sprayed with the box size (780×1710×1730 mm), gross weight, "MADE IN CHINA", and shipping mark.Then wait for the goods to be loaded and sent to the freight forwarder.
